Linux Commands Examples

A great documentation place for Linux commands


bring a network interface up ifdown - take a network interface down ifquery - parse interface configuration

see also : ip - ifconfig


ifup [-nv] [--no-act] [--verbose] [-i FILE|--interfaces=FILE] [--allow CLASS] -a|IFACE...
ifup -h
ifup -V

ifdown [-nv] [--no-act] [--verbose] [-i FILE|--interfaces=FILE] [--allow CLASS] -a|IFACE...

ifquery [-nv] [--no-act] [--verbose] [-i FILE|--interfaces=FILE] [--allow CLASS] -a|IFACE...

ifquery -l|--list [-nv] [--no-act] [--verbose] [-i FILE|--interfaces=FILE] [--allow CLASS] -a|IFACE...

add an example, a script, a trick and tips

: email address (won't be displayed)
: name

Step 2

Thanks for this example ! - It will be moderated and published shortly.

Feel free to post other examples
Oops ! There is a tiny cockup. A damn 404 cockup. Please contact the loosy team who maintains and develops this wonderful site by clicking in the mighty feedback button on the side of the page. Say what happened. Thanks!



ifup -a

Bring up all the interfaces defined with auto in /etc/network/interfaces

ifup eth0

Bring up interface eth0

ifup eth0=home

Bring up interface eth0 as logical interface home

ifdown -a

Bring down all interfaces that are currently up.

ifquery -l

Print names of all interfaces specified with the auto keyword.

ifquery -l --allow=hotplug

Print names of all interfaces specified with the allow-hotplug keyword.

ifquery eth0

Display the interface options as specified in the ifupdown configuration. Each key-value pair is printed out on individual line using ": " as separator.

sudo ifup eth0
sudo ifup --force wlan0


The ifup and ifdown commands may be used to configure (or, respectively, deconfigure) network interfaces based on interface definitions in the file /etc/network/interfaces. ifquery command may be used to parse interfaces configuration.


A summary of options is included below.
, --all

If given to ifup, affect all interfaces marked auto. Interfaces are brought up in the order in which they are defined in /etc/network/interfaces. Combined with --allow, acts on all interfaces of a specified class instead. If given to ifdown, affect all defined interfaces. Interfaces are brought down in the order in which they are currently listed in the state file. Only interfaces defined in /etc/network/interfaces will be brought down.


Force configuration or deconfiguration of the interface.

-h, --help

Show summary of options.


Only allow interfaces listed in an allow-CLASS line in /etc/network/interfaces to be acted upon.

-i FILE, --interfaces=FILE

Read interface definitions from FILE instead of from /etc/network/interfaces.


Exclude interfaces from the list of interfaces to operate on by the PATTERN. PATTERN uses a usual shell glob syntax. If shell wildcards are not used, it must match the exact interface name. This option may be specified multiple times resulting in more than one pattern being excluded.


Set OPTION to VALUE as though it were in /etc/network/interfaces.

-n, --no-act

Don’t configure any interfaces or run any "up" or "down" commands.


Don’t run any mappings. See interfaces(5) for more information about the mapping feature.


Don’t run any scripts under /etc/network/if-*.d/

-V, --version

Show copyright and version information.

-v, --verbose

Show commands as they are executed.

-l, --list

For ifquery, list all the interfaces which match the specified class. If no class specified, prints all the interfaces listed as auto.



definitions of network interfaces See interfaces(5) for more information.


current state of network interfaces

known bugs

known bugs limitations

The program keeps records of whether network interfaces are up or down. Under exceptional circumstances these records can become inconsistent with the real states of the interfaces. For example, an interface that was brought up using ifup and later deconfigured using ifconfig will still be recorded as up. To fix this you can use the --force option to force ifup or ifdown to run configuration or deconfiguration commands despite what it considers the current state of the interface to be.

The file /run/network/ifstate must be writable for ifup or ifdown to work properly. If that location is not writable (for example, because the root filesystem is mounted read-only for system recovery) then /run/network/ifstate should be made a symbolic link to a writable location. If that is not possible then you can use the --force option to run configuration or deconfiguration commands without updating the file.

Note that the program does not run automatically: ifup alone does not bring up interfaces that appear as a result of hardware being installed and ifdown alone does not bring down interfaces that disappear as a result of hardware being removed. To automate the configuration of network interfaces you need to install other packages such as udev(7) or ifplugd(8).


ifup, ifdown, and ifquery are actually the same program called by different names.

The program does not configure network interfaces directly; it runs low level utilities such as ip to do its dirty work.

When invoked, ifdown checks if ifup is still running. In that case, SIGTERM is sent to ifup.

see also

interfaces, ip , ifconfig .


The ifupdown suite was written by Anthony Towns <aj[:at:][:dot:]au>.

How can this site be more helpful to YOU ?

give  feedback